New
The new corrosion resistant Ai SuperVac 21 cfm commercial grade vacuum pump
Warning: Last items in stock!
Availability date:
The new corrosion resistant Across international SuperVac 21 cfm commercial grade vacuum pump. These pumps are designed for reliable long time continuous operation, they will take your equipment's vacuum down to 0.3 micron in minutes. Comes standard with all necessary fittings and a high capacity exhaust oil mist filter which also returns trapped pump oil back to the pump and makes the pump quieter to run.
Multi-level gas ballast is designed to allow purposefully pull a less deep and slower vacuum by opening the gas ballast, allowing dry air to go directly into the pump and diluting the vacuum pull, and it also helps keep moisture, solvent, and other contaminants from getting stuck in the pump, and instead passing through to the exhaust.
It is important to note that pumps should always be ran in a well ventilated area.
Electrical requirements |
115V 60Hz or 230V 50/60Hz single phase, 1100 watts |
Pumping rate |
21 cfm |
Ultimate vacuum without gas ballast |
0.3 micron/millitorr |
Ultimate vacuum with gas ballast |
6 micron/millitorr |
Inlet/outlet connection |
KF25/NW25 flange |
Oil volume |
2 liter / 2.1 quart |
Motor rate | 1715 rpm |
Working temperature | 5 to 40°C |
Unit/shipping dimensions (LxWxH) |
21x7.5x12" / 37x10x17" |
Unit/shipping weight |
80 Lb / 98 Lb |
Recommended oil | Ultra-grade 19 |
Noise level | < 58 dB |
Warranty | Two years |
Compliance |
UL (E500328), CE |
No customer reviews for the moment.